The Ruger 10/22 Bolt Buffer™ from Buffer Technologies
replaces the bolt stop pin at the rear of the receiver.
This bolt stop pin stops the bolt from crashing into the rear of the alloy receiver
and in doing so transfers that energy to the drilled receiver holes. This abrupt
transfer of energy can affect zero on scoped rifles. Repeated cycling will cause
elongation of these holes and eventual damage to the receiver. The solution
is to replace the plain steel pin with a durable material possessing the proper
elasticity. The Ruger Bolt Buffer™ is manufactured from an advanced polymer
that will decelerate the bolt more gradually, reducing the already low felt
recoil of your 10/22 and allowing for quicker set-up for the next shot.
Installation is a breeze. You just need a screwdriver, and in a couple of minutes
you're ready to head for the range. You can feel the difference the first time
you shoot it.
For owners of suppressed 10/22s, the Bolt Buffer™ will significantly reduce
the cycling noise of the action by eliminating the slap of the steel bolt on
the steel pin. On an acoustically efficient suppressed 10/22, this will make
a perceptible difference. With all the custom parts available for the Ruger
10/22, you can very quickly invest hundreds of dollars in it. Without a receiver,
all those custom parts are just so many pieces. So why not give your receiver
the highest degree of protection available, the Ruger 10/22 Bolt Buffer™.
949 9884 Monday
- Friday 8 am - 4 pm CST