updated 10/18/2011
336 Shootout Lane
Princeton, LA 71067
318-949-9884 phone
318-949-9829 fax
|
|
|
|
|
updated 10/18/2011
|
| CCG, Inc 336 Shootout Lane Princeton, LA 71067 318-949-9884 phone 318-949-9829 fax |
|
|
Services
Ruger 10/22 and 77/22
|
Name
|
Price
|
Description | |
 |
Accuracy Package
|
$ 145.00
|
Trigger job, match chamber, match crown, tune extractor, function test. |
|
Although we do not actually do any work
on the stock, we like to have the entire gun for this package so that
we may function test and check the fit in your stock. Stock fit is a major
component to an accurate shooting 10/22. Return shipping $ 25 by FedEx
Ground to Continental US. Accuracy testing not included.
Not available on 77/17, 77/22 Hornet or 77/22 with threaded receiver. AS SEEN on Tom Gresham's Gun Talk TV |
|||
|
|
Accuracy Test
|
$ 35.00
|
We'll put our Leupold 36X Vari-X III on your rifle and see what it can do @ 50 yards with some of our good shooting ammunition. ammo not included. |
|
|
Match Chamber /
Crown / Tuned Extractor
|
$ 95.00
|
Install Clark's EXCLUSIVE match chamber in Ruger's factory barrel. Also includes tuned extractor. Guaranteed to improve accuracy. We've also performed this service on other aftermarket barrels with sucess. |
|
Accomplished by "setting the barrel
back". We actually remove part of the back of the barrel in order
to run our special 2 part reamer in your barrel. It is also then necessary
to modify (shorten) where the V-Block attatches to compensate. Not
available on 77/17, 77/22 Hornet or 77/22 with threaded receiver.
|
|||
|
|
Match Chamber /
Tuned Extractor
|
$ 75.00
|
Install Clark's EXCLUSIVE match chamber in Ruger's factory barrel. Also includes tuned extractor. Guaranteed to improve accuracy. We've also performed this service on other aftermarket barrels with sucess. |
|
Accomplished by "setting the barrel
back". We actually remove part of the back of the barrel in order
to run our special 2 part reamer in your barrel. It is also then necessary
to modify (shorten) where the V-Block attatches to compensate. Not
available on 77/17, 77/22 Hornet or 77/22 with threaded receiver.
|
|||
|
|
Match Crown
|
$ 45.00
|
Have our 45°
Match Crown cut on your barrel.
|
|
Can help to improve accuracy especially
in conjunction with our Match Chamber. If this is the only service you
require, all we need is the barrel. We touch up the cut with cold blue.
You can have your barrel completely reblued for an additional $ 35.00.
|
|||
|
|
10/22
Trigger Job |
$ 75.00
|
Pull is reduced
to a crisp 2.5 - 2.75 lbs pull. Overtravel screw and speed bolt release
are included
|
|
The speed bolt release allows one hand
bolt release. Instead of having to pull back on the bolt and operate the
release, you only need to pull back on the bolt handle and the release
automatically drops out of the way. A must for Sportsman's Team Challenge.
If a trigger job is all you require, you may ship only your trigger assembly.
It's easily removed by pushing out the two large cross pins in the receiver.
Since it is a non-serial numbered item, it can be shipped by US Mail.
Return shipping $ 10 by FedEx Ground to Continental US. ADD $ 30 to upgrade
from plastic to OEM Metal
trigger guard, trigger & magazine release.
|
|||
|
|
77/22 Trigger Job
|
$ 75.00
|
Pull is reduced
to a crisp 1.5 - 2 lbs pull. Overtravel screw is installed and set.
|
|
If our trigger job is the only service
required, you may send in your Receiver Assembly only. Since this is a
serial numbered item, you must treat it like it's a firearm for shipping
purposes. The only advantage to this is to reduce the size of the box
needed as well as having less weight. Return Shipping $ 10 - $ 15 by UPS
Ground to Continental US.
|
|||
|
All above packages / services apply only to Ruger OEM
FACTORY rifles.
|
|||
|
|
|||
|
|
Drill & Tap
Barrel
|
$ 65.00
|
Drill &
tap barrel for scope base installation.
|
|
|
Cut & Recrown
Barrel
|
$ 50.00
|
Cut and recrown barrel. Includes cold blue. |
|
No charge for this service if performed
in conjunction with fluting. Add $ 35 for reblue.
|
|||
|
|
10/22 Barrel Installation
|
$ 50.00
|
Match barrel installation. 10/22 Long Rifle or Magnum. |
|
Does not include barrel, trigger job, stock
inletting, tune extractor, function or accuracy testing.
|
|||
|
|
77/22 Barrel Installation
|
$ 50.00
|
Match barrel installation. 77/22 Long Rifle or Magnum. |
|
Does not include barrel, trigger job, stock
inletting, tune extractor, function or accuracy testing.
|
|||
|
|
77/22 Barrel Installation
|
$ 150.00
|
Match barrel installation (Threaded Receivers). 77/17 M2, 77/17 HMR, 77/22 Long Rifle or 77/22 Magnum. |
|
Does not include barrel, trigger job, stock
inletting, tune extractor, function or accuracy testing.
|
|||
|
|
Tune Extractor
|
$ 10.00
|
Necessary for reliable function with MOST aftermarket barrels on the 10/22 in 22 LR. |
|
|
Function Test
|
$ 25.00
|
Make sure your gun functions reliably. We normally test with Federal Hi Velocity ammo. |
|
|
Accuracy Test
|
$ 35.00
|
Shoot test target using Leupold 36X scope with MATCH GRADE ammunition. Ammo not included. |
|
|
Inlet Stock
|
$ 65.00
|
Cut out (INLET) Factory Wood stock to accept .920" Bull Barrel or NEW .720" Midweight. Reseal wood. |
|
|
$ 105.00
|
Furnish & Install Power Custom Scope Base. Specify Black or Silver | |
|
|
Drill
Receiver Back for Cleaning 10/22
|
$ 30.00
|
Drill Hole in Back of 10/22 Receiver to Facilitate Cleaning. |
|
|
Pillar Bedding
10/22 or 77/22 |
$ 150.00
|
Install alunimum Pillars into 10/22 or 77/22 Rifle using bedding compound |
|
|
Thread Barrel
|
$ 100.00
|
Thread barrel 1/2"-28
(typically for use with compensator, muzzle brake, supressor, silencer,
flash hider.) Available ONLY on .920 STEEL bull barrels or our Exclusive
.720" Midweight barrel. Add $ 25 for thread protector. |